Lockout: Use locking to prevent someone from randomly operating the isolated power source or equipment until the end of maintenance and the lock is removedTagout: Use a tag to warn others that an isolated power source or device cannot be operated casuallyApplication: The lock and tag function is required for general equipment maintenanceWhere is the customer#39;s pain point, cost is spent, there

One-way and two-way feeding and discharging safety grating·Cross-check the feeding and discharging mode·Two-way detection feeding and discharging mode·Protection height from 800-1500MM·Maximum protection distance is 6M-12M.·Integrated a variety of intelligent functions·Integrated manual or automatic reset·External relay feedback input (EDM)▊產品選型產品名稱產品類型高度檢測方向雙向進出料

As the most important part of safety loop, safety controller/safety PLC has been recognized by more and more people, but in the process of use, there are still many users who are confused about the differences between safety relay and ordinary relay, so I would like to share them with you here. As we all know, we must remember three words in the concept of safety design:

·Optical synchronization, simplifying wiring and improving installation efficiency ·The maximum detection height can reach 1960mm, and the stable distance to light can reach 16 m.·Unique vibration reduction design, good vibration resistance·High protection level: IP65 protection level·Strong anti-optical interference and electromagnetic interference, stable performance.·Small size, beautiful

·All structural appearance, strong, safe and resistant.·Multi-function: it has the functions of mechanism locking and monitoring at the same time·Multiple coding modes: only coding and general coding are optional.·Single redundancy and double output: preventing potential safety hazards caused by single loop failure.·Cascade connection of switches can reduce the number of transmission points.·Skillful appearance: the cutting length is ?30mm*30mm.·Flexible installation: it can be directly installed on an aluminum frame not exceeding 30 mm.

·Various contact combinations: two groups of normally open+two groups of normally closed, three groups of normally open+one group of normally closed.·Force-guided contact structure (according to EN 50205 standard)·Strong load capacity: 6A contact switching ability·Low input power consumption: 360mW·Strong insulation capability: input-output bears 10kV surge voltage.·Environmentally friendly products (RoHS compliant)